Philips SE765 - Manual (Page 42)

42 EN
Outgoing messages
The outgoing message is the message your
caller hears when the answering machine picks
up the call. The answering machine has 2 pre-
recorded outgoing messages: the [ANSWER
& RECORD] mode and [ANSWER ONLY]
mode.
Record an outgoing message
The maximum length of the outgoing message
you can record is 3 minutes. The newly
recorded outgoing message automatically
replaces the old one.
1
Press MENU.
2
Select [ANSWER MACHINE] >
[RECORD OGM], then press [SELECT]
to confirm.
3
Select [ANSWER & RECORD] or
[ANSWER ONLY], then press [SELECT]
to confirm.
4
Select [RECORD OGM], then press
[SELECT] to confirm.
5
Recording starts after the beep.
6
Press [OK] to stop recording or the
recording stops after 3 minutes.
You can listen to the newly recorded
»
outgoing message.
Note
To restore the pre-recorded outgoing •
message, delete your current outgoing
message.
Listen to the current outgoing
message
1
Press MENU.
2
Select [ANSWER MACHINE] >
[RECORD OGM], then press [SELECT]
to confirm.
3
Select [ANSWER & RECORD] or
[ANSWER ONLY]. Press [SELECT] to
confirm.
4
Select [PLAY], then press [SELECT] to
confirm.
You can listen to the current outgoing
»
message.
Delete an outgoing message
1
Press MENU.
2
Select [ANSWER MACHINE] >
[RECORD OGM], then press [SELECT]
to confirm.
3
Select [ANSWER & RECORD] or
[ANSWER ONLY], then press [SELECT]
to confirm.
4
Select [DELETE], then press [SELECT]
to confirm.
5
The pre-recorded outgoing message is
restored.
Note
No pre-recorded outgoing message can be •
deleted.
Incoming messages
Each message can be up to 3 minutes long.
When you receive new messages, the new
message indicator flashes on the answering
machine and the handset displays a notification
message.
Note
If you pick up the phone when the caller leaves •
a message, the recording stops and you can
talk to the caller directly.