Philips SE765 - Manual (Page 14)

14 EN
Install the handset
Caution
Risk of explosion! Keep batteries away from •
heat, sunshine or fire. Never discard batteries
in fire.
Use only the supplied batteries.
•
Risk of decreased battery life! Never mix •
different brands or types of batteries.
Note
Charge the batteries for 16 hours before first •
use.
Warning
Check the battery polarity when inserting in •
the battery compartment. Incorrect polarity
may damage the product.
a The batteries are pre-installed in the
handset. Pull the battery tape off from
the battery door before charging.
b Place the handset on the base station to
charge the handset.
Note
If the handset becomes warm when the •
batteries are being charged, it is normal.
Check the battery level
When the handset is off the base station/
charger, the icon indicates the battery level:
Full (steady on)
Medium (flashing)
Low (empty)
When you see the empty battery icon and
hear an alert tone from the handset, the
battery level is low and needs recharging.
When the handset is on the base station/
charger, the battery icon keeps flashing
until charging completes.
When the charging completes, the
battery icon keeps steady on.
Set the country
To make the phone work, select your country.
1
When you see the welcome message,
press [OK].
2
Select your country and press [SELECT]
to confirm.
The country setting is saved.
»
3
Set the date and time.
The phone is now ready to use.
»
To set the date and time later, press
»
[BACK] to skip this setting.