Philips SE765 - Manual (Page 39)

39 EN
English
15 Advanced
settings
Register the handsets
You can register additional handsets to the base
station. The base station can register up to 5
handsets.
Auto registration
1
Place the unregistered handset on the
base station.
The handset detects the base station
»
and start to register automatically.
Registration is completed in less than 2
»
minutes. The base station automatically
assigns a handset number to the
handset.
Manual registration
If auto registration fails, register your handset
manually to the base station.
1
Press MENU on the handset.
2
Select [ADVANC. SETTINGS] >
[REGISTER], then press [SELECT] to
confirm.
3
Press and hold on the base station for
5 seconds until you hear a confirmation
beep.
4
Enter the system PIN. Press [CLEAR] to
make corrections.
5
Press [OK] to confirm the PIN.
Registration is completed in less than 2
»
minutes. The base automatically assigns
a handset number to the handset.
Note
If the PIN is incorrect or no base is found •
within a certain period, your handset displays
a notification message. Repeat the above
procedure if registration fails.
Note
The preset PIN is 0000. No change can be •
made on it.
Unregister the handsets
1
If two handsets share the same base
station, you can unregister a handset with
another handset.
2
Press MENU.
3
Select [ADVANC. SETTINGS] >
[UNREGISTER], then press [SELECT] to
confirm.
4
Enter the system PIN. (The preset PIN
is 0000). Press [CLEAR] to remove the
number.
5
Select the handset number to be
unregistered.
6
Press [SELECT] to confirm.
The handset is unregistered.
»
Tip
The handset number displays beside the •
handset name in standby mode.