beautypg.com

Paradyne Dual DSU 7511 User Manual

Page 10

background image

10

7511-A2-GN10-10

January 1999

495-14797

3. Slide the circuit card into the slot and press until the connectors are seated

firmly into the back of the carrier.

4. If power is applied to the carrier:

— All LEDs on the card light up momentarily.

— The card completes its power-up self-test.

— The Alarm and OK LEDs are turned off or on depending on the test

results.

5. Press the faceplate latch to secure the circuit card.

6. Rotate the circuit pack lock into the closed position, and tighten the screw.

7. Return to the rear of the carrier and tighten the screw on the rear connector

plate.