Planet Technology GSW-2416SF - Manual (Page 6)

2. HARDWARE DESCRIPTION
This product provides both Copper and Fiber connecter at same switch – 24 Ports TP and 16 Ports SFP (shared with Port
#9 to 24), and automatically distinguishes the speed of incoming connection.
This section describes the hardware features of GSW-2416SF. For easier management and control of the Switch,
familiarize yourself with its display indicators, and ports. Front panel illustrations in this chapter display the unit LED
indicators. Before connecting any network device to the GSW-2416SF, read this chapter carefully.
2.1 Front Panel
The Front Panel of the GSW-2416SF Web Smart Ethernet Switch consists of 24x Auto-Sensing 10/100/1000Mbps
Ethernet RJ-45 Ports and 16x SFP(Small Form-factor Pluggable) Ports. The LED Indicators are also located on the front
panel of the GSW-2416SF. And one console port at Front panel for switch management.
Figure 2-1: GSW-2416SF Switch front panel
2.1.1 LED indicators
System
LED Color Function
PWR Green Lights to indicate that the Switch has power.
Per 10/100/1000Mbps port
LED Color Function
1000
LNK/ACT
Green
Lights to indicate that the Switch is successfully connecting to the network at
1000Mbps.
Blinks to indicate the Switch is receiving or sending data.
100
LNK/ACT
Amber
Lights to indicate that the Switch is successfully connecting to the network at
100Mbps.
Blinks to indicate the Switch is receiving or sending data.
Per SFP Interface
LED Color Function
SFP
LNK/ACT
Green
Lights to indicate that the Switch is successfully connecting to the network at
1000Mbps through SFP interface.
Blinks to indicate the Switch is receiving or sending data.
2.2 Rear Panel
The rear panel of the GSW-2416SF indicates an AC inlet power socket, which accepts input power from 100 to 240V AC,
50-60Hz, and 1A max. And one I/O power switch at rear panel for power management.
100~240V
AC
50/60H
z
ON
OFF
POWER
Figure 2-2: GSW-2416SF Switch rear panel
EM-GSW2416SFv1 - 6 -