Planet Technology GSW-2416SF - Manual (Page 14)

4.4 Getting Started
>” prompt. The screen of available commands in Figure 4-4 appears,
and the detail description shown in Table 4-1.
4.4.1 General Guidelines
The GSW-2416SF allows users to configure the device via command line under console interface. Please type “help” or
“?” for all available commands in the”GSW-2416SF
Figure 4-4 GSW-2416SF available commands screen
Command Description
show port Show all port current status of GSW-2416SF.
show static [n] Show per port TX/RX static of GSW-2416SF.
show vlan Show current VLAN group status of GSW-2416SF.
show ip
Show current IP subnet address and default gateway information of
GSW-2416SF.
show version Show current Software and Hardware versions of GSW-2416SF.
show flowcontrol Show current flow control status on each port of GSW-2416SF.
show vlantag Show current VLAN Tagged status on each port of GSW-2416SF.
show vlanaware Show current VLAN aware status on each port of GSW-2416SF.
show priority Show current priority status of GSW-2416SF.
show pvid Show current PVID value on each port of GSW-2416SF.
show vid Show current VLAN ID of each VLAN Group of GSW-2416SF.
set port [n]
Set per port auto-negotiation, speed duplex mode, and admin down of
GSW-2416SF.
set vlan [n] Assign port to specific VALN Group of GSW-2416SF.
EM-GSW2416SFv1 - 14 -