Planet Technology GSW-2416SF - Manual (Page 38)

5. Setup
A V LAN (VLAN) ng that limits the broadcast domain. It allows you to isolate network traffic
so only VLAN members. Basically, creating a VLAN from a switch is
logically uivalent of ices
are still plug into the same tch
The GSW-2416SF switch s po In the default configuration, VLAN
support is “disable”.
5.3.1 VLAN Group an m
Thi es of GSW-2416SF, the screen in Figure 5-4
appears.
3 VLAN
irtual is a logical network groupi
members of the VLAN receive traffic from the same
eq reconnecting a group of network devices to another Layer 2 switch. However, all the network dev
swi physically.
up rts Port-Base VLAN setting in web management page.
d ember settings
s section provid current status and member setting of each VLAN group
Figure 5-4 GSW-2416SF VLAN Settings Web Page screen
1. Enter VLAN ID for the selected VLAN group. There are maximum 24 VLAN groups to provide configured and the
erved for management purpose.
ers for the VLAN group.
r setup completed, please press “Apply” to take affect.
#
Notice:
range for the VLAN ID is 1-4095; 0 res
2. Checked the Member box to select the memb
3. Afte
4. To setup another VLAN Group, click the VLAN Group ID button. After the web page load completed, repeat the
previous steps.
5. To remove a port from specific VLAN group, just cancel the Member check Box and press “Apply” to take affect.
Change VLAN settings for every time, you have to reboot the switch to apply new settings.
EM-GSW2416SFv1 - 38 -