Planet Technology GSW-2416SF - Manual (Page 25)

4.4.3.4 Set vlantag
This is an additional function of VLAN configuration.
This command allows configuring per port VLAN Tagged/Untagged status. When adding a VLAN to selected port, it tells
the switch whether to keep or remove the tag from a frame on egress. The correct usage is shown as below:
Set vlantag [n] enable/disable
[n]=1-24, n is the specific Port ID.
Enable – keep the tag from a frame on egress.
Disable – Remove the tag from a frame on egress.
Default Setting: Disable
The configuring per port VLAN Tagging screen in Figure 4-21 appears.
Figure 4-21 Per Port VLAN Tagging Configuration screen
#
Notice:
Change VLAN settings for every time, you have to reboot the switch to apply new settings.
4.4.3.5 Set vlanaware
This is an additional function of VLAN configuration.
This command allows disable or enable per port vlan aware function of GSW-2416SF. The correct usage is shown as
below:
Set vlanaware [n] enable/disable
[n]=1-24, n is the specific Port ID.
Enabled – Tagged Frame remain original VID while leaving tagged port.
Disabled - Tagged Frame wouldn’t remain original VID while leaving tagged port.
Default Setting: Disable
The vlan-aware mode setting screen in Figure 4-22 appears
EM-GSW2416SFv1 - 25 -