Panasonic WV-CS564 - Manual (Page 38)

39
(5) To Restore the Camera Default Position (REFRESH)
Move the cursor to REFRESH by using the joystick and press the
F2 button of the WV-CU550B.
(For the WV-RM70, WV-CU360 or WV-CU161, keep pressing the
Right and Left switches simultaneously for 2 seconds or more.)
(6) Camera Resetting (CAMERA RESET)
Move the cursor to CAMERA RESET by using the joystick and
press the F3 button of the WV-CU550B.
The camera is reset to the factory preset parameters.
(For the WV-RM70, keep pressing the Right, Left and Set switches
simultaneously for 2 seconds or more. For the WV-CU360 or WV-
CU161, keep pressing the Right and Left switches and the numer-
ic button 5 simultaneously for 2 seconds or more.)
(7) To Close the SPECIAL Menu
Move the cursor to RET and press the CAM (SET) key.
The setup menu appears on the monitor screen.
** SPECIAL **
CHROMA GAIN
AP GAIN
PEDESTAL
HUE
REFRESH
CAMERA RESET
RET
•••• | ••••
•••• | ••••
• | •••••••
•••• | ••••
- +
→
PUSH SW
→
PUSH SW
** SPECIAL **
CHROMA GAIN
AP GAIN
PEDESTAL
HUE
REFRESH
CAMERA RESET
RET
•••• | ••••
•••• | ••••
• | •••••••
•••• | ••••
- +
→
PUSH SW
→
PUSH SW
** SPECIAL **
CHROMA GAIN
AP GAIN
PEDESTAL
HUE
REFRESH
CAMERA RESET
RET
•••• | ••••
•••• | ••••
• | •••••••
•••• | ••••
- +
→
PUSH SW
→
PUSH SW