Timer ok g, Record tv programme, Code – Philips DVDR5590H User Manual
Page 32: About timer recording, Timer recording (g, System), Continued)

English
32
Record TV Programme
(continued)
About timer recording
Use the timer recording to automatically
start and stop a recording at a later date/
time. This recorder tunes to the right
programme channel and begins recording
at the specifi ed time.
With this recorder, you can schedule up
to 40 recordings at a time and up to 6
(six) hours for each recording. During
timer recording, changing the recorder’s
channel is not possible.
Note: If the scheduled timer recording
is longer than 6 (six) hours, it splits into
two or more titles.
There are two ways to program a
timer recording
– Using the G-
CODE
system
– Using manual timer programming
SUBTITLE
INFO
SELECT
EDIT
AUDIO
PAUSE LIVE TV
G-CODE
TIMER
OK
G-
CODE
Timer recording (G-
CODE
system)
This is a simple timer programming
system. To use it, enter the G-
CODE
programme numbers associated with
your television programme. You can fi nd
this number in your TV listings magazine.
A
Turn on the TV to the correct viewing
channel for the recorder.
B
Press G-
CODE
on the remote control.
The G-
CODE
entry menu appears.
G-
CODE
System
Enter G-
CODE
number :
Clear
Store
Cancel
C
Use the alphanumeric keypad 0-9 to
enter the G-
CODE
programme numbers
(e.g. 5-312-4 or 5,312 4, key in ‘53124’).
To clear the programme number, press
the Red button for { Clear }.
To cancel the programming and exit the
menu, press the Yellow button for
{ Cancel }.
D
To confi rm your entry, press the Green
button for { Store }.
A message to enter channel list
appears.