Panasonic KX-FLM671 - Manual (Page 57)

10. Programmable Features
57
10.6 Scan features
Feature/Code Selection
Setting the scan mode for
Push Scan
{#}{
4}{9}{3}
{ 1} “ VIEWER” (default): The scanned image will be displayed in the [Multi-
Function Viewer] window.
{
2} “ FILE”: The scanned image will be saved as a file.
{ 3} “ E-MAIL”: The scanned image will be saved for e-mail attachment.
{ 4} “ OCR”: The scanned image will be displayed in the OCR window.
Holding the previous
scanning parameter for Push
Scan
{#}{
4}{9}{4}
{ 0} “ DISABLED” (default): Deactivates this feature.
{ 1} “ ENABLED”: The unit will hold the previous scan settings for each mode of
push scan; scan type, resolution, file format, brightness, contrast, scan size.
SMTP setting for scan to e-
mail (via e-mail server) (KX-
FLM671, LAN connection
only) This feature can be programmed only through the web browser interface (page
60).
Registering the scan to e-mail
destinations (via e-mail
server) (KX-FLM671, LAN
connection only)
L This feature can be
programmed only through
the web browser interface.
When you send scanned files via the e-mail server, you can register e-mail
destinations (up to 30 destinations) for the unit through the web browser
interface in advance.
1. Start Multi-Function Station.
2. [Utilities] i [Configuration Web Page] i [Device Configuration]
3. Type “root” as the user name, then enter the password (feature #155 on
page 51). i [OK]
4. Select the [SCAN FEATURE] tab.
5. Click [Edit] next to [SCAN TO E-MAIL].
6. Click [Edit] next to the desired scan to e-mail user.
7. Enter name and e-mail address, and then select the station key number
from the drop-down list if necessary. i [Submit]
8. Close the web browser.