Panasonic KX-FLM671 - Manual (Page 51)

10. Programmable Features
51
Changing the password for
feature programming via
remote operation
{#}{
1}{5}{5}
1. {Menu} i {#}{1}{5}{5} i {Set}
2. Enter the current password. i {Set}
L The default password is “ 1234”.
3. Enter a new 4-digit password using 0–9. i {Set}
4. Enter the new password again. i {Set} i {Menu}
Note:
L It is recommended that you change this password from the default
password.
L This password is also used for feature programming via web browser (KX-
FLM671, LAN connection only).
Setting the ringer pattern
{#}{
1}{6}{1}
{ 1} “ A” (default)
{ 2} “ B”
{ 3} “ C”
Changing the ring count in
FAX ONLY mode
{#}{
2}{1}{0}
{ 1} “ 1”
{ 2} “ 2”
{ 3} “ 3” (default)
{ 4} “ 4”
{ 5} “ 5 EXT. TAM” (External Telephone Answering Machine)
Note:
L If you are using the unit with an answering machine, set to more than 4
(page 43).
Setting the Caller ID list to
print automatically
{#}{
2}{1}{6}
{ 0} “ OFF” (default): The unit will not print the Caller ID list, but will keep records
of the information for the last 30 callers.
{
1} “ ON”: The unit will print the Caller ID list automatically after every 30 new
calls (page 46).
Setting the time adjustment
{#}{
2}{2}{6}
Using this feature, the unit’s date and time setting will be automatically adjusted
when caller information is received.
{
1} “ AUTO” (default): The date and time setting will be automatically adjusted.
{ 2} “ MANUAL”: Deactivates this feature.
Setting the recording paper
size
{#}{
3}{8}{0}
{ 1} “ LETTER”(default): Letter-size paper
{ 2} “ A4”: A4-size paper
{ 3} “ LEGAL”: Legal-size paper
Holding the previous contrast
setting
{#}{
4}{6}{2}
{ 0} “ DISABLED” (default): Deactivates this feature.
{ 1} “ ENABLED”: The unit will hold the previous setting.
Note:
L The previous setting will be held individually for copying and sending faxes.
Setting the default operation
mode
{#}{
4}{6}{3}
To select the default operation mode when the selected time of the mode timer
(feature #464) passes.
{
1} “ COPY”: Copy mode is selected as default.
{ 2} “ FAX” (default): Fax mode is selected as default.
Note:
L You cannot select the scan mode using this feature.
Setting the default operation
mode timer
{#}{
4}{6}{4}
To set the timer before returning to the default operation mode (feature #463).
{
0} “ OFF”: Deactivates this feature.
{ 1} “ 30s”: 30 seconds
{ 2} “ 1min” (default): 1 minute
{ 3} “ 2min”: 2 minutes
{ 4} “ 5min”: 5 minutes
Feature/Code Selection