Panasonic SC-HT830V - Manual (Page 33)

33
RQT7921
∫ To check a program
Press [PROG].
The timer-programming screen appears.
∫ To correct a program
While the timer programming screen is on the television,
1 Press [PROG] to highlight the program you want to correct and
press [ENTER].
2 Select the item with [ 2 1] and correct it with [3 4].
∫ To cancel a program
While the timer programming screen is on the television,
1 Press [PROG] to highlight the program you want to cancel.
2 Press [CANCEL].
To clear the timer programming screen
Press [MENU].
The unit switches tape speed to EP if it determines there is not enough
tape to record the entire program in SP mode. The change may start
at the beginning of the recording or part way through, depending on
the remaining tape.
Before using this function, set the length of the tape you are using
(
l 38). It may not work correctly if you use tapes with irregular
lengths.
[Note]
This function does not guarantee recording of the entire program.
To check, correct, and cancel timer programs
Auto SP/EP change
DATE CH ON OFF 1/2
27WE 2 8:02PM 9:30PMSP
SU-SA 125 10:30AM 11:00AMA
SU 14
3:00PM 4:00PMEP
19TU 5 10:15PM 11:30PMVP
28TH AV 8:02PM 9:30PMSP
30SA 4
7:10PM 7:55PMVP
– – – – – – –:– – –:– –
– – – – – – –:– – –:– –
1
2
3
4
5
6
7
8
SELECT: s/r: 3 4 2 1
1st program
(30 min.)
2nd program (60 min.)
Example program combination
Example program combination
30 min. at SP
15 min.
at SP 45 min.
at EP (when using a 60-min.
tape)
[Remember] Press [VHS] first.
RQT7921-P_ENG.book 33 ページ ２００５年２月４日 金曜日 午後４時５８分