Pioneer AVH-P5700DVD - Manual (Page 93)

Mixing navigation voice/AVG-
VDP1 beep and audio sound
Mixing navigation voice/beep
and audio sound
When there is a navigation guidance, you can
mix the guidance voice/beep sound from a
Pioneer navigation unit with the audio sound
from this system. You can select either mixing
both the guidance voice and the beep sound
or the guidance voice only.
! You can operate this function only when a
Pioneer navigation unit is connected to this
unit.
! When the multi-channel processor (e.g.,
DEQ-P6600) is connected to this unit, you
cannot use this function.
! We recommend that you select GUIDE to
ensure quality sound.
1 Touch NEXT on the initial menu.
2 Touch NAVI MIX to switch the mixingof
navigation voice/beep.
Touching NAVI MIX will switch the mixing of
navigation betweent ALL (mixing both gui-
dance voice and beep) and GUIDE (mixing
guidance voice only).
Mixing AVG-VDP1 beep and
audio sound
When connecting the AVG-VDP1 to this unit, a
beep sound is occasionally outputted from the
AVG-VDP1. To ensure the quality audio sound
from this unit, set this function to GUIDE to
properly mix the beep sound and the audio
sound.
! You can operate this function only when a
Pioneer Vehicle Dynamics Processor (AVG-
VDP1) is connected to this unit.
! When the multi-channel processor (e.g.,
DEQ-P6600) is connected to this unit, you
cannot use this function.
! We recommend that you select GUIDE to
ensure quality sound.
1 Touch NEXT on the initial menu.
2 Touch NAVI MIX to switch the mixingof
AVG-VDP1 beep.
Touching NAVI MIX switches the mixing set-
tings between ALL (mixing all the time) and
GUIDE (mixing when a beep sound is out-
putted).
Resetting the audio functions
You can reset all audio functions except vo-
lume.
! Only when the multi-channel processor
(e.g., DEQ-P6600) is connected to this unit,
you can operate this function.
1 Touch NEXT on the initial menu.
2 Touch RESET.
3 Touch RESET.
4 Touch RESET again to reset audio func-
tions.
# To cancel resetting the audio functions, touch
CANCEL.
Setting the TV signal
When this unit is connected to a TV tuner, you
need to adjust the TV signal suitable to your
country TV signal setting.
Initial Settings
En
93
Section
19
Initial
Settings