Tuner listening to the radio 23, Listening to the radio, Tuner – Pioneer AVH-P5700DVD User Manual

Page 23

Listening to the radio

These are the basic steps necessary to operate

the radio. More advanced tuner operation is

explained starting on the next page.

This units AF (alternative frequencies search)

function can be turned on and off. AF should

be off for normal tuning operation (refer to

page 27).

1 Source icon

Shows which source has been selected.

2 Band indicator

Shows which band the radio is tuned to,

MW, LW or FM.

3 Preset number indicator

Shows which preset has been selected.

4 Frequency indicator

Shows to which frequency the tuner is

tuned.

5 Preset list display

Shows the preset list.

6 LOCAL indicator

Shows when local seek tuning is on.

7 STEREO indicator

Shows that the frequency selected is being

broadcast in stereo.

1 Touch the source icon and then touch

TUNER to select the tuner.

2 Touch the screen to display the touch

panel keys.

3 Touch BAND to select a band.

Touch BAND repeatedly until the desired band

is displayed, FM1, FM2, FM3 for FM or

MW/LW.

4 To select a preset channel, touch a pre-

set channel on the list.

The preset channel you selected is tuned in.

# When the list of channels is not displayed,
touch LIST.

5 To perform manual tuning, briefly

touch c or d.

The frequencies move up or down step by

step.

# You can also perform manual tuning by press-
ing c or d button.

6 To perform seek tuning, keep touching

c or d for about one second and release.

The tuner will scan the frequencies until a

broadcast strong enough for good reception is

found.

# You can cancel seek tuning by briefly touching
either c or d.
# If you keep touching c or d you can skip sta-
tions. Seek tuning starts as soon as you release
the key.
# You can also perform seek tuning by pressing
and holding c or d button.

Note

If you do not use the touch panel keys within 30
seconds, they will be hidden automatically.

Tuner

Section

Tuner