Controller 91, Switching the auxiliary setting, Setting the illumination switch – Pioneer AVH-P5700DVD User Manual

Page 91: Selecting the illumination color, Setting the rear output and subwoofer controller, Initial settings

Switching the auxiliary setting

It is possible to use auxiliary equipment with

this unit. Activate the auxiliary setting when

using auxiliary equipment connected to this

unit.

% Touch AUX on the initial menu to turn

auxiliary settingon.

# To turn auxiliary setting off, touch AUX
again.

Setting the illumination

switch

You can choose whether to have the illumina-

tion of this unit switch on/off when the ignition

key is turned to the ACC position or the power-

off position.

! When the navigation unit or AVG-VDP1 is

connected to this unit, you cannot operate

this function.

% Touch ILM SW on the initial menu to

turn the illumination switch on.

Set the illumination switch ON to have the illu-

mination of this unit remain on when the igni-

tion key is turned to the ACC position. Set to

OFF to have the illumination off when the igni-

tion key is turned to the ACC position.

# To turn the illumination switch off, touch
ILM SW again.

Note

Never set the illumination switch on if the vehicle
does not have the ACC position. It may cause bat-
tery leakage.

Selecting the illumination

color

This unit is equipped with two illumination col-

ors, green and red. You can select the desired

illumination color.

% Touch ILM CL on the initial menu to se-

lect the desired illumination color.

Touching ILM CL will switch the illumination

color between GREEN (green) and RED

(red).

Setting the rear output and

subwoofer controller

This units rear output (rear speaker leads out-

put) can be used for full-range speaker (FULL)

or subwoofer (SUB. W) connection. If you

switch the rear output setting to the SUB. W,

you can connect a rear speaker lead directly to

a subwoofer without using an auxiliary amp.

Initially, the unit is set for rear full-range speak-

er connection (FULL). When rear output is

connected to full range speakers (when FULL

is selected), you can connect the RCA sub-

woofer output to a subwoofer. In this case, you

can select whether to use the subwoofer con-

trollers (low pass filter, phase) built-in SUB.W

or the auxiliary FULL.

! When the multi-channel processor (e.g.,

DEQ-P6600) is connected to this unit, you

cannot operate this function.

1 Touch NEXT on the initial menu.

2 Touch REARSP.

3 Touch a or b to switch the rear output

setting.

Touch a to select full-range speaker and FULL

appears in the display. Touch b to select sub-

woofer and SUB. W appears in the display.

Initial Settings

Section

Initial

Settings