Introduction of dsp adjustments, Using the sound field control, Digital signal processor – Pioneer AVH-P5700DVD User Manual

Page 74

Introduction of DSP

adjustments

You can use this unit to control multi-channel

processor (e.g. DEQ-P6600), which is sold sepa-

rately.

! Some functions may differ depending on the

multi-channel processor connected to this

unit.

By carrying out the following settings/adjust-

ments in the order shown, you can create a fi-

nely-tuned sound field effortlessly.

1 Setting the speaker setting
2 Using the position selector
3 Auto TA and EQ (auto-time alignment and auto-

equalizing)

4 Adjusting the time alignment
5 Adjusting the speaker output levels using a

test tone

6 Selecting a cross-over frequency
7 Adjusting the speaker output levels
8 Adjusting 3-band parametric equalizer

1 DSP display

Shows the DSP function names.

1 Press A.MENU button to display MENU.

MENU appears on the display.

2 Touch DSP to display the DSP function

names.

The DSP function names are displayed and

operable ones are highlighted.

# To go to the next group of function names,
touch NEXT.
# To return to the previous group of function
names, touch PREV.
# When playing discs recorded with more than
96 kHz sampling frequency, you cannot use audio
functions. Also, equalizer curve setting,
POSITION, AUTO EQ and AUTOTA will be can-
celled.
# When playing discs recorded with more than
96 kHz sampling frequency, audio is outputted
from front speaker only.
# When selecting the FM tuner as the source,
you cannot switch to SLA.
# When playing other than the DVD disc, you
cannot switch to D.R.C.
# When neither FRONT-L nor FRONT-R is se-
lected in POSITION, you cannot switch to
TIME ALIGN.
# When both the center speaker and the rear
speaker are set to OFF in the speaker setting, you
cannot switch to DOLBY PL II.
# To return to the previous display, touch BACK.
# To return to the display of each source, touch
ESC.

Note

If you do not operate the DSP function within
about 30 seconds, the display is automatically re-
turned to the source display.

Using the sound field control

The SFC function creates the sensation of a

live performance.

Digital Signal Processor

Section