Specifications – Panasonic DLP PT-D3500U User Manual
Page 58
58
Specifications
1
Value when accessory lens is used, “PICTURE MODE” is set at “DYNAMIC” and zoom lens is in the wide lens
position.
2
HDCP (High-bandwidth Digital Content Protection)
HDCP is a digital video signal encryption system developed with the aim of protecting digital content.
Power supply
AC 120 V, 50 Hz/60 Hz
Power consumption
400 W (about 10 W in standby without fan running)
DLP
TM
panel
Panel size
Display system
Number of pixels
0.7 inch (aspect ratio 4:3)
DMD
TM
element, DLP type
786 432 pixels (1 024 x 768 dots)
Lens
Powered zoom
Powered focus control
1 to 1.32
F=1.7 to 2.0 f=25.6 mm (1") to 33.8 mm (1.3")
Projection lamp
1 bulb x 300 W UHM lamp
Optical output
3 500 lm
1
Applicable scanning frequency
For video signal (S-video included)
For RGB signal
For DVI-D signal
For YP
B
P
R
signal
Horizontally 15.73 kHz/15.63 kHz, vertically 59.94 Hz/50 Hz
Horizontally 15 kHz–91 kHz, vertically 50 Hz–85 Hz,
Panasonic Intelligent Auto Scanning (PIAS) system
Dot clock frequency Less than 108 MHz
Compliant with HDCP
2
EDID1: 480p, 576p, 720/60p, 1080/60i, 1080/50i
EDID2: VGA480/60, SVGA/60, XGA/60, XGA/70, XGA/85, SXGA/60
[480i], horizontally 15.73 kHz, vertically 59.94 Hz
[480p], horizontally 31.5 kHz, vertically 59.94 Hz
[576i], horizontally 15.63 kHz, vertically 50 Hz
[576p], horizontally 31.25 kHz, vertically 50 Hz
[720/60p], horizontally 45 kHz, vertically 60 Hz
[1035/60i], horizontally 33.75 kHz, vertically 60 Hz
[1080/60i], horizontally 33.75 kHz, vertically 60 Hz
[1080/50i], horizontally 28.13 kHz, vertically 50 Hz
• HD/SYNC, VD terminals are not compliant with 3 value composite SYNC.
Contrast ratio
1 600:1 (when “HIGH” is selected as the “CONTRAST MODE” setting)
Color system
7 standards (NTSC/NTSC4.43/PAL/PAN-N/PAL-M/SECAM/PAL60)
Screen size
50 inch–600 inch
Screen aspect ratio
4:3
Projection scheme
Menu-selectable from front/rear/ceiling mount, and floor standing
Interface ports
RGB1 input terminal
1 set, BNC x 5
[For YP
B
P
R
input]
Y: 1.0 V[p-p] synchronization signal included, P
B
P
R
: 0.7 V[p-p] 75
Ω
[For RGB input] 0.7 V[p-p] 75
Ω
For G-SYNC: 1.0 V[p-p] 75
Ω
HD/SYNC: TTL, high-impedance, positive/negative polarity
automatically adjusted
VD: TTL, high-impedance, positive/negative polarity automatically
adjusted
• However, HD/SYNC, and VD terminals are not compliant with 3-value
direct SYNC.