Philips DCB293 - Manual (Page 21)

22
Remote control does not work
%HIRUHSUHVVLQJDQ\IXQFWLRQEXWWRQÀUVW ‡
select the correct source with the remote
control instead of the main unit.
Reduce the distance between the remote
‡
control and the unit.
Insert the battery with its polarities (+/–
‡
signs) aligned as indicated.
Replace the battery.
‡
Aim the remote control directly at the ‡
sensor on the front of the unit.
&DQQRWGLVSOD\VRPHÀOHVLQ86%GHYLFH
7KHQXPEHURIIROGHUVRUÀOHVLQWKH86% ‡
device has exceeded a certain limit. This
phenomenon is not a malfunction.
7KHIRUPDWVRIWKHVHÀOHVDUHQRW
‡
supported.
USB device not supported
The USB device is incompatible with the ‡
unit. Try another one.
Poor radio reception
Increase the distance between the unit ‡
and your TV or VCR.
Fully extend the DAB/FM antenna.
‡
Clock/timer setting erased
Power has been interrupted or the power ‡
cord has been disconnected.
Reset the clock/timer.
‡
Timer does not work
Set the clock correctly. ‡
Switch on the timer. ‡
EN