4 play, Play a disc 1, Play from usb – Philips DCB293 User Manual
Page 11: Turn on 1
12
4 Play
Play a disc
1
Press CD to select the disc source.
2
Press to open the disc compartment.
3
Insert a disc with the printed side facing
outward.
4
Press to close the disc compartment.
Play starts automatically. If not, press
»
.
Play from USB
Note
Ensure that the USB device contains playable
audio content.
1
Insert the USB device into the
socket.
2
Press USB to select the USB source.
Play starts automatically. If not, press
»
.
To select a folder, press
/ .
7RVHOHFWDQDXGLRÀOHSUHVV
/
.
5
Press PROG/CLOCK SET
WRFRQÀUP
The hour digits are displayed and begin
»
to blink.
6
Press
/
to set the hour.
7
Press PROG/CLOCK SET
WRFRQÀUP
The minute digits are displayed and
»
begin to blink.
8
Press
/
to set the minute.
9
Press PROG/CLOCK SET
WRFRQÀUPWKH
clock setting.
Turn on
1
Press .
The unit switches to the last selected
»
source.
Switch to standby
1
Press again to switch the unit to
standby mode.
The clock (if set) appears on the
»
display panel.
To switch the unit to Eco Power Standby
mode:
1
Press and hold for more than 2
seconds.
The backlight on the display panel
»
turns off.
Tip
The unit switches to Eco Power Standby mode
after 15 minutes in standby mode.
To switch between standby mode and Eco
Standby Mode:
1
Press and hold for more than 2
seconds.
EN