Philips DCB293 - Manual (Page 14)

15
DRC
Dynamic range control (DRC) adds or
removes a degree of compensation for the
differences in the dynamic range between
radio stations.
‡ [DRC off] (DRC is switched off.)
‡ [DRC high] (DRC is switched on;
the default setting recommended for
noisy environment.)
‡ [DRC low] (DRC is set to half
normal level)
Prune
With this feature, you can clear all the invalid
stations from the station list.
1
In the DAB+ mode, press MENU to
enter the menu options.
2
Press / repeatedly until [Prune] is
displayed.
3
Press ENTER WRFRQÀUPWKHVHOHFWLRQ
» [Y] or [N] is displayed.
4
Press / to switch between [Y] and
[N].
5
Press ENTER WRFRQÀUP
System
With this feature, you can:
‡
know the software version of the unit
1
In the DAB+ mode, press MENU to
enter the menu options.
2
Press / repeatedly until [System] is
displayed.
3
Press ENTER WRFRQÀUP
» [SW version] is displayed.
4
Press ENTER again.
The software version of the main unit
»
is displayed.
‡ reset DAB/FM stations
1
In the DAB+ mode, press MENU to
enter the menu options.
2
Press / repeatedly until [System] is
displayed.
3
Press ENTER WRFRQÀUP
» [SW version] is displayed.
2
Press / to scroll the menu options:
‡ [Station list]
‡ [Full scan]
‡ [Manual tune]
‡ [DRC] (dynamic range control)
‡ [Prune]
‡ [System]
3
To select an option, press ENTER.
4
Repeat step 2-3 if sub-option is available
under one option.
Full scan
Full scan is used to perform a wide range of
DAB+ radio search.
1
In the DAB+ mode, press MENU to
enter the menu options.
2
Press / repeatedly until [Full scan] is
displayed.
3
Press ENTER WRFRQÀUPWKHVHOHFWLRQ
Full scan starts automatically.
»
Manual tune
:LWKWKLVIHDWXUH\RXFDQWXQHWRDVSHFLÀF
channel/frequency manually. In addition to
antenna orientation for better radio reception,
the optimal reception can also be obtained
with this feature.
1
In the DAB+ mode, press MENU to
display the “Manual tune” option.
2
Press ENTER WRFRQÀUPWKHVHOHFWLRQ
The display shows a channel and its
»
frequency.
3
Press / repeatedly until the desired
channel/frequency appears.
4
Press ENTER WRFRQÀUPWKHVHOHFWLRQ
Tip
You may press ‡ DISPLAY to change the service
information on the display.
You may adjust the position of the antenna to
‡
obtain the optimal signal strength.
Press ‡ MENU to exit manual tune
function.
English
EN