Pioneer KEH-P6020RB - Manual (Page 35)

08
Section
Initial Settings
En 35
English
Español
Deutsch
F
rançais
Italiano
Nederlands
Switching the warning tone
If the front panel is not detached from the head
unit within five seconds of turning off the igni-
tion, a warning tone will sound. You can turn off
this warning tone.
1 Press FUNCTION to select WARN .
Press FUNCTION repeatedly until WARN
appears in the display.
2 Select WARN on or off with
5/∞.
Pressing
5/∞ will switch
WARN between on
and off and that status will be displayed (e.g.,
WARN :ON ).
Switching the auxiliary setting
It is possible to use auxiliary equipment with
this unit. Activate the auxiliary setting when
using auxiliary equipment connected to this
unit.
1 Press FUNCTION to select AUX .
Press FUNCTION repeatedly until AUX appears
in the display.
2 Select AUX on or off with
5/∞.
Pressing
5/∞ will switch
AUX between on and
off and that status will be displayed (e.g.,
AUX :ON ).
Switching the dimmer setting
To prevent the display from being too bright at
night, the display is automatically dimmed
when the car’s headlights are turned on. You
can switch dimmer on or off.
1 Press FUNCTION to select DIMMER .
Press FUNCTION repeatedly until DIMMER
appears in the display.
2 Select DIMMER on or off with
5/∞.
Pressing
5/∞ will switch
DIMMER between on
and off and that status will be displayed (e.g.,
DIMMER :ON ).
Selecting the illumination color
(for KEH-P6020R)
This product is equipped with two illumination
colors, green and red.
You can select the desired illumination color.
1 Press FUNCTION to select ILL. CLR .
2 Select the desired illumination color with
2/3.
Pressing
2/3 will switch
ILL. CLR between red
or green and that status will be displayed (e.g.,
ILL. CLR :GRN ).