Pioneer KEH-P6020RB - Manual (Page 18)

05
Section
Cassette Player
En 18
Playing a tape
These are the basic steps necessary to play a
tape with your cassette player. More advanced
cassette player operation is explained starting
on page 19.
1 TAPE DIRECTION indicator
Shows the direction of the tape transport.
2 PLAY TIME indicator
Shows the elapsed playing time of the cur-
rent side of the tape.
1 Press OPEN to open the front panel.
Cassette loading slot appears.
2 Insert a cassette tape into the cassette
loading slot.
Playback will automatically start.
Cassette loading slot
TAPE EJECT button
• You can eject a cassette tape by pressing
TAPE EJECT .
3 Close the front panel.
• After a casette tape has been inserted, press
SOURCE to select the cassette player.
4 Use VOLUME to adjust the sound level.
Rotate to increase or decrease the volume.
5 To perform fast forward or rewind, press
2
or
3.
FF or REW appears in the display.
• To cancel fast forward or rewind and return to
playback, press
BAND/ESC .
• You can cancel fast forward or rewind by
pressing
2 or 3 in the same direction twice.
6 To perform forward or rewind music
search, press
2 or 3 twice.
F-MS (forward music search) or R-MS (rewind
music search) appears in the display. The cas-
sette player will fast forward or rewind to the
next or previous blank spot on the tape and
begin to play.
• To cancel music search and return to play-
back, press
BAND/ESC .
• You can cancel music search by pressing
2
or
3 in the same direction again.
7 To change the direction of the tape trans-
port, press
BAND/ESC .
Notes
• Do not insert anything other than a cassette
tape into the cassette loading slot.
• PLAY TIME indicator starts from 00’00” in the
following cases:
— When a tape is inserted
— When the tape direction is changed
— When you rewind the tape to the beginning
• PLAY TIME indicator is halted when fast for-
ward, rewind or music search is operating.
q w