Pioneer KEH-P6020RB - Manual (Page 30)

Audio Adjustments
Using the equalizer
The equalizer lets you adjust the equalization to
match car interior acoustic characteristics as
desired.
Recalling equalizer curves
There are seven stored equalizer curves which
you can easily recall at any time. Here is a list of
the equalizer curves:
Display Equalizer curve
POWERFUL Powerful
NATURAL Natural
VOCAL Vocal
CUSTOM1, 2 Custom 1, 2
EQ FLAT Flat
SUPER BASS Super bass
• CUSTOM1 and CUSTOM2 are adjusted equal-
izer curves that you create.
• A separate
CUSTOM1 curve can be created
for each source.
• If you make adjustments when a curve other
than
CUSTOM2 is selected, the equalizer curve
settings are memorized in CUSTOM1 .
• A CUSTOM2 curve can be created common to
all sources.
• If you make adjustments when the
CUSTOM2
curve is selected, the CUSTOM2 curve is
updated.
• When
EQ FLAT is selected no supplement or
correction is made to the sound. This is useful
to check the effect of the equalizer curves by
switching alternatively between
EQ FLAT and a
set equalizer curve.
Press EQ to select the equalizer.
• If the equalizer has been previously set to an
equalizer curve other than
POWERFUL then the
title of that previously selected equalizer curve
will be displayed, such as
NATURAL , VOCAL ,
CUSTOM1 , CUSTOM2 , EQ FLAT or SUPER
BASS .
Adjusting equalizer curves
You can adjust the currently selected equalizer
curve setting as desired. Adjusted equalizer
curve settings are memorized in
CUSTOM1 or
CUSTOM2 .
1 Press AUDIO to select the equalizer mode.
Press AUDIO until EQ-LOW/EQ-MID/EQ-HIGH
appears in the display.
2 Select the band you want to adjust with
the
2/3.
EQ-LOW (low)— EQ-MID (mid)— EQ-HIGH (high)
3 Press
5 or ∞ to adjust the equalizer curve.
Each press of
5 or ∞ increases or decreases
the equalizer curve respectively.
•
+6 – –6 is displayed as the equalizer curve is
increased or decreased.
• The actual range of the adjustments are differ-
ent depending on which equalizer curve is
selected.
Note
• If you make adjustments when a curve other
than CUSTOM2 is selected, the newly
adjusted curve will replace the previous CUS-
TOM1 curve.
En 30
07
Section