Pioneer KEH-P6020RB - Manual (Page 22)

06
Section
Multi-CD Player
En 22
Playing tracks in a random order
Random play lets you play back tracks in a ran-
dom order within the repeat range,
MCD (multi-
CD player repeat) and DSC (disc repeat).
1 Select the repeat range.
Refer to Repeating play on page 21.
2 Press FUNCTION to select RANDOM .
Press FUNCTION until RANDOM appears in the
display.
3 Press
5 to turn random play on.
RANDOM :ON appears in the display. Tracks will
play in a random order within the previously
selected
MCD (multi-CD player repeat) or DSC
(disc repeat) ranges.
4 Press
∞ to turn random play off.
RANDOM :OFF appears in the display. Tracks
will continue to play in order.
Scanning CDs and tracks
While you are using DSC (disc repeat), the
beginning of each track on the selected disc
plays for about 10 seconds. When you are using
MCD (multi-CD player repeat), the beginning of
the first track of each disc is played for about 10
seconds.
1 Select the repeat range.
Refer to Repeating play on page 21.
2 Press FUNCTION to select SCAN .
Press FUNCTION until SCAN appears in the
display.
3 Press
5 to turn scan play on.
SCAN :ON appears in the display. The first 10
seconds of each track of the present disc (or the
first track of each disc) is played.
4 When you find the desired track (or disc)
press
∞ to turn scan play off.
SCAN :OFF appears in the display. The track (or
disc) will continue to play.
• If the display has automatically returned to
the playback display, select
SCAN again by
pressing FUNCTION .
Note
• After track or disc scanning is finished, nor-
mal playback of the tracks will begin again.
Pausing CD playback
Pause lets you temporarily stop playback of the
CD.
1 Press FUNCTION to select PAUSE .
Press FUNCTION until PAUSE appears in the
display.
2 Press
5 to turn pause on.
PAUSE :ON appears in the display. Play of the
current track pauses.
3 Press
∞ to turn pause off.
PAUSE :OFF appears in the display. Play will
resume at the same point that you turned pause
on.