Polaroid Digital Microscope Camera - Manual (Page 26)

22
Installing DMC software on your PowerMac/PowerPC
To take pictures with the DMC camera, you must use one of
the following programs on your PowerMac or PowerPC.
Both are provided with the DMC camera and are installed
during the procedure described below.
· DMC Plug-in software Using the Plug-in after it is installed
requires an image-processing application (not provided)
compatible with Adobe Photoshop plug-in modules.
· DMC Direct software If you do not have an image-
processing application compatible with Photoshop plug-in
modules, you can use DMC Direct to operate the DMC
camera.
To install the DMC software on your PowerMac or
PowerPC:
1 Insert the DMC for PowerMac/PowerPC disk into an
internal or external drive.
2 Be sure to read any Read Me First sheets packed with the
camera and any Read Me file included on the disk. These
contain important late-breaking product information that
may affect installation or use.
3 Double-click the Installer icon to open the Installer program.
4 Click the Install button and follow instructions on the screen.
5 Choose your Photoshop Plug-ins folder.
6 When an on-screen message indicates that installation has
been completed, click OK.
7 If you have not already connected the DMC to the computer,
turn off the computer and connect the camera as described
on page 13.