Polaroid Digital Microscope Camera - Manual (Page 17)

Setting up 13
4 Attach the cables to the camera as shown.
Camcabl.ai
a SCSI cable
b Power adapter cable
Connecting the camera to your PC
How you connect the camera to your PC depends on
whether your computer has a SCSI adapter, and whether you
have additional SCSI devices connected to your computer.
The DMC camera is a SCSI device designed to connect to a
SCSI adapter on your IBM-compatible computer. If your
computer has a compatible SCSI adapter, you can skip this
section and go to the appropriate connection instructions
below.
If your computer does not have a compatible SCSI adapter,
you must open the computer case and install one. Follow
installation and setup instructions provided with the adapter.
After you install and set up the adapter, be sure you have set
the camera SCSI ID as described on page 8 before continuing
with the appropriate connection instructions below.
Installing a SCSI
adapter