Promise Technology VTrack M-Class M300f - Manual (Page 18)

VTrak M-Class Quick Start Guide
18
5. Press Ctrl-A to save these settings and move to the Management Port
configuration screen.
Management Port
By default, DHCP is enabled on VTrak (above). To set Management Port settings
manually, or to view the current settings, you must disable DHCP.
To view the current Management Port settings:
1. Press the arrow keys to highlight DHCP.
2. Press the spacebar to toggle to Disabled.
The current Management Port IP are displayed (above).
3. Record the information on this screen.
4. Press the spacebar to toggle DHCP back to Enable.