Panasonic AJ-D450 - Manual (Page 43)

– 43 –
The underline on the setting item denotes the initial setting.
Item Setting
No.
Superimposed
display
Description
No.
Superimposed
display
A00 LOAD 0000
0001
0002
0003 USER2
USER3
USER4
USER5 This selects the user file whose contents will be loaded into
USER1.
0:
1:
2:
3:
When the SET button is pressed after loading, the setting will
be stored in the memory. When the MENU button is pressed,
the setting will not be changed.
The USER2 file contents are loaded.
The USER3 file contents are loaded.
The USER4 file contents are loaded.
The USER5 file contents are loaded.
A01 SAVE 0000
0001
0002
0003
0004 USER2
USER3
USER4
USER5
LOCKED
A02 P.ON LOAD 0000
0001
0002
0003
0004 OFF
USER2
USER3
USER4
USER5
This loads the contents of the selected user file into USER1
and it starts operation with the USER1 settings when the
power is turned on.
0:
1:
2:
3:
4:
Operation is started with the settings of the previously set
user file.
The contents of USER2 are loaded into USER1 and
operation is started with the USER1 settings.
The contents of USER3 are loaded into USER1 and
operation is started with the USER1 settings.
The contents of USER4 are loaded into USER1 and
operation is started with the USER1 settings.
The contents of USER5 are loaded into USER1 and
operation is started with the USER1 settings.
A03 MENU LOCK 0000
0001 OFF
ON
This selects whether to set or release the user file (USER2 –
USER5) lock mode.
0:
1:
The lock cannot be set for USER1.
The lock is released (changes can be made).
The lock is set (changes are prohibited).
This selects the user file into which the USER1 settings will
be saved.
0:
1:
2:
3:
4:
• User files whose status have been set to change prohibit
cannot be selected.
• When all the user files are in the change prohibit status, the
“LOCKED” display appears and the contents cannot be saved.
The settings are saved in USER2.
The settings are saved in USER3.
The settings are saved in USER4.
The settings are saved in USER5.
This display appears when all the user files are in the
change prohibit status.
No. A00 (LOAD), No. A01 (SAVE) and No. A02 (P.ON LOAD) are the menu items which
can be set only for USER1. They are not displayed with the USER2 – USER5 files.
No. A03 (MENU LOCK) is the menu item which can be set only for the USER2 – USER5
files. It is not displayed with USER1. •
•
Item Setting
No.
Superimposed
display
Description
No.
Superimposed
display
USER menu
(continued)
725 CUE SLOW 0000
0001 STEP
LINEAR
This selects the tape travel status (CUE track playback
status) during SLOW playback.
0:
1:
Priority is given to the output picture, and tape travel is set
to the step feed status.
Priority is given to CUE track playback, and the tape
travel is set to the linear status.
When “1” (LINEAR) has been set:
• It may not be possible to achieve as clear a picture as in the STEP mode.
• The CTL counter may not operate properly.