Pioneer SUPERTUNERD AVIC-N5 - Manual (Page 110)

Switching the SIRIUS channel
select mode
You can switch modes between the two meth-
ods for selecting and listing channels.
All CH Mode:
You can select a channel from all channels.
Category Mode:
You can select a channel within selected cate-
gory.
% Touch [Mode] to select the desired
channel select mode.
Touch [
Mode] repeatedly to switch between
the two modes.
Switching between the
detailed information display
and the preset list display
You can switch the left side of the basic screen
according to your preference.
% Touch [Detail] (or [Preset]).
Each touch of [
Detail] (or [Preset]) changes
the detail information display or preset list dis-
play.
Detail information display
(e.g.
All CH Mode)
Preset list display
(e.g.
All CH Mode)
SIRIUS channel information
Storing and recalling broadcast
stations
If you touch any of the preset tuning keys
Preset1
— Preset6 to easily store up to six
broadcast stations for later recall with the
touch of a key.
1 Select the channel that you want to
store in memory.
2 Touch [Preset] to display the preset list.
3 Keep touching a preset tuning key
Preset1
— Preset6 until the SIRIUS preset
number (e.g., P.CH 1) stops flashing.
The number you have touched will flash in the
SIRIUS preset number indicator and then re-
main lit. The selected station has been stored
in memory.
The next time you touch the same preset tun-
ing key
Preset1
— Preset6 the station is re-
called from memory.
p Up to 18 stations, 6 for each of three SIRIUS
bands can be stored in memory.
p You can also touch
or to recall
stations assigned to preset tuning keys
Preset1
— Preset6 in the detailed informa-
tion display when the
“All CH Mode” is se-
lected.
Selecting a channel in the
channel category
1 Touch [Mode] to select Category Mode.
Using the AV Source (Pioneer AV Equipment)
En
110
Chapter
08