Philips PICOPIX PPX1230 - Manual (Page 9)

Video playback 9
EN
5 Video playback
1 Connect the audio/video output of the external
device to the A/V or VGA / YPbPr socket of the
Pocket Projector. Use the corresponding cable and
cable adapter for this purpose.
2 To find out how to deactivate the video output for
the external device, please see the relevant instruc-
tion manual. Most often, this option is labeled "TV
out" or "TV Output" in the corresponding menu.
3 Start the video playback on the external device.
4 Modify the volume with А / Б.
Modify settings during playback
1 Press the ¡ or ¢ key.
2 Use the ¡/¢ keys to choose from the following
settings:
Brightness: Adjust brightness
Contrast: Adjust contrast
Saturation: Adjust colour saturation
Smart Settings: Select predefined settings for
brightness / contrast / colour saturation
Volume: Adjust volume level
3 Modify the setting using А/Б.
The device saves the modified settings automatically.
Notice
Both jacks occupied
If both sockets on the Pocket Projector
are occupied, only the signal from the A/V
socket will be played. In order to play the
signal from the VGA / YPbPr socket, you
have to remove the cable from the A/V
socket.