Philips PICOPIX PPX1230 - Manual (Page 7)

Connect to the playback device 7
EN
4 Connect to the playback device
Only use the supplied cable or cables that are available
as accessories to connect the projector.
Supplied Cables
Video-(CVBS) cable
Cables available as Accessories
Component Video Cable YUV /YPbPr
................................................. (PPA 1110 / 253372492)
VGA-Audiocable ...................... (PPA 1150 / 253372489)
iPod / iPhone Cable ................. (PPA 1160 / 253372471)
Connecting using Video
(CVBS) Cable
Use the projector's audio/video cable (AV cable) to
connect camcorders, DVD players or digital cameras.
The jacks for these devices are yellow (video), red
(audio right) and white (audio left).
Composite DVD Camcorder P2
1 Connect the supplied AV cable to the A/V socket of
the projector.
2 Connect the video device's audio/video jacks to the
AV cable using a conventional composite video
(RCA) cable.
Connecting to mobile multimedia devices
Connecting to mobile multimedia devices
Some video devices (e.g.: pocket multimedia players, ...)
require specific connection cables. There are either
supplied with the device or acquired from the manufac-
turer of the multimedia device. Please note that only the
original cables from the device manufacturer may func-
tion.
Composite Mobile Device P2
Signal output, multimedia devices
Connecting using
Component-Video (YPbPr/
YUV) Cable
Please use this type of connection to get the highest
possible quality of image. This cable is available as an
accessory. The device jacks have the colours green (Y),
blue (U/Pb), red (V/Pr) for the video signal and red
(audio right) and white (audio left) for the audio signal.
Component DVD Camcorder P2
1 Connect the video component cable (accessory) to
the VGA / YPbPr socket of the projector.
2 Connect the video device's appropriate colored
sockets to the component video cable of the projec-
tor using a conventional component video (RCA)
cable.
Notice
Switching to the multimedia device sig-
nal output
See the multimedia device instruction manual
to find out how to switch the signal output to
this jack.
Notice
Two red phono (RCA) connectors
When connecting, note that there are two
red phono (RCA) connectors on the cable.
One is for the right audio signal and the
other for the V/Pr element of the compo-
nent video signal. If these two connectors
are inserted incorrectly, the projected
image appears green and the audio signal
for the right speaker will not work.