Paradyne 6310-A4 - Manual (Page 4)

4
Getting Started
Before beginning your modem’s installation, make sure that you have all the equipment
that you need.
Package Checklist
Verify that your package contains the following:
❑
Hotwire 6310 ReachDSL v1 Modem
❑
DSL interface cable with RJ11 connectors
❑
Power cord with power transformer
Be sure to register your warranty at www.paradyne.com/warranty.
Wiring and Cables You Need
The following wiring and standard connectors are used with this product:
❑
Standard RJ11 (or RJ14) wall jack for the ReachDSL modem cabling.
❑
Standard Ethernet 8-pin, non-keyed modular plug for a PC or workstation. An
Ethernet straight-through or crossover cable is used.
— Refer to Installing the Hotwire 6310 ReachDSL v1 Modem on page 5 for
Ethernet installation details.
— Refer to Cables & Connectors on page 11 for ReachDSL modem and Ethernet
cable pin assignments.