Paradyne 6310-A4 User Manual
Paradyne Hardware
1
Hotwire
®
ReachDSL
™
v1 (MVL
®
) Modem,
Model 6310-A4, with Inline Phone Filter
Installation Instructions
Document Number 6310-A2-GN12-00
September 2001
Contents
Hotwire 6310 ReachDSL v1 (MVL) Modem Overview
..................................
..............................................................................................
Installing the Hotwire 6310 ReachDSL v1 Modem
.......................................
.............................................................................................
HomeLink (for ReachDSL v1 Modems Only)
................................................ 10
Increasing the Number of End-User Systems
.............................................. 10
.................................................................................... 11
Optional ReachDSL Modem Wall Placement
............................................... 13
Technical Specifications for Hotwire 6310 ReachDSL v1 Modem
........................................................................ 16
Warranty, Sales, Service, and Training Information
...................................... 21
Hotwire 6310 ReachDSL v1 (MVL) Modem Overview
The Hotwire
®
6310 ReachDSL
™
version 1 (formerly MVL
®
) Modem is a component in
the Hotwire ReachDSL System and interoperates with the Hotwire 8310 MVL, or
Hotwire 8312/8314 ReachDSL Card in the DSLAM (Digital Subscriber Line Access
Multiplexer) system. This system provides high-speed Internet or corporate LAN access
over traditional twisted-pair copper telephone wiring.
The ReachDSL technology:
T
Utilizes an inline phone filter on the ReachDSL modem’s PHONE jack.
T
Operates over existing copper wire with existing telephone jacks.
T
Includes a second line pass-through from the ReachDSL modem’s LINE jack to
PHONE jack to accommodate an attached 2-line telephone.
T
Provides rate adaptive data rates to dynamically adapt and allocate bandwidth to
optimize applications.
Document Outline
- Contents
- Hotwire 6310 ReachDSL v1 (MVL) Modem Overview
- Getting Started
- Installing the Hotwire 6310 ReachDSL v1 Modem
- Power-On
- Troubleshooting
- HomeLink (for ReachDSL v1 Modems Only)
- Increasing the Number of End-User Systems
- Cables & Connectors
- Optional ReachDSL Modem Wall Placement
- Technical Specifications for Hotwire 6310 ReachDSL v1 Modem
- Important Safety Instructions
- Government Requirements
- Warranty, Sales, Service, and Training Information
- Document Feedback
- Trademarks
- Patent Notification