Paradyne 6310-A4 - Manual (Page 13)

13
Optional ReachDSL Modem Wall Placement
The Hotwire 6310 ReachDSL v1 Modem is designed for tabletop placement. The
ReachDSL modem can also be mounted on a wall. To mount the modem, you will need:
❑
Two slotted-head #6 self-threading screws with plastic anchors
❑
Drill and 3/16" drill bit for the plastic anchors
❑
Screwdriver
A template with the dimensions for the two screws is provided. See ReachDSL Modem
Hardware Template on page 14.
Procedure
To mount the Hotwire 6310 ReachDSL v1 Modem:
1. Use a drill to install the plastic anchors.
2. Use a screwdriver to install the screws. Do not install the screws flush with the wall.
Leave enough clearance to hang the modem housing from the screws.
Wall
Fasteners
01-17004
Hotwire
ReachDSL
Modem