Panasonic Sa-xr57 - Manual (Page 35)

35
RQT8552
Be
fore
u
se
• Even if the AC mains lead is disconnected from the household mains socket, the stations remain in the memory for approximately two weeks.
Preset tuning
Presetting stations
n
Auto presetting
1
Set the channel reception to FM 87.50 MHz or AM 522 kHz
(9 kHz steps), AM 530 kHz (10 kHz steps). (ápage 34)
Preset channels that are automatically assigned by this unit are:
FM: 1 to 30
AM: 21 to 30
Preset the FM stations first. If the AM stations are preset before the
FM stations, they will be erased when the FM stations are preset.
2
Enter the menu.
Press
3
Select “TUNER ” and confirm the setting.
4
Select “AUTO MEMO ” and confirm the setting.
5
Select “START ” and press [ENTER].
Select “ CANCEL ” to cancel.
• During automatic presetting, the memory indicator ( ) flashes
and the frequency scrolls. The memory indicator and channel
numbers are displayed for a second when a station is preset.
• The last station to be preset is displayed when presetting finishes.
• Frequencies may not be preset correctly when broadcast waves are
too strong or too weak. In such cases, carry out presetting manually.
n
Manual presetting
1
Tune to the station you want to preset.
(ápage 34)
2
Enter the menu.
Press
3
Select “TUNER ” and confirm the setting.
4
Select “MEMORY ” and confirm the setting.
5
Select a channel number and press [ENTER].
“ STORED ” is displayed.
• To continue presetting, press [TUNE 2 or 1] to tune
another station from step 1.
6
Press [-MENU, –SETUP, RETURN] 2 times to
select “EXIT ” and press [ENTER].
• FM stations can also be preset in the MONO mode.
(ábelow)
Listening to preset stations
n On the remote control
• Select the channel.
• Press the numbered buttons to select the channel.
To select a two digit number
e.g. 21: [ ≧ 10,
–/– – ] → [2] → [1]
n On the main unit
1
Enter the menu.
Press
2
Select “TUNER ” and confirm the setting.
3
Select “TUNE MODE ” and confirm the setting.
4
Select “PRESET ” and confirm the setting.
5
Press [-MENU, –SETUP, RETURN] 2 times to
select “EXIT ” and press [ENTER].
6
Select the channel.
Press
• Hold down the button to change channels faster.
Select “MANUAL ” in step 4 when you wish to perform manual tuning (á page 34) .
MENU
SETUP
RETURN
M
MENU
SETUP
RETURN
CH
0
-/--
MENU
SETUP
RETURN
TUNE
Reducing excessive noise (on the main unit)
Select if noise is excessive during radio reception. Preparation: Press [-MENU, –SETUP, RETURN] to enter the menu.
n During FM stereo reception
You can improve FM reception by switching reception to monaural.
1
Select “TUNER ” and confirm the setting.
2
Select “FM MODE ” and confirm the setting.
3
Select “MONO ” and confirm the setting.
• When this is set, “ MONO ” appears on the display.
• Select “ AUTO ” to cancel.
4
Press [-MENU, –SETUP, RETURN] 2 times to
select “EXIT ” and press [ENTER].
n During AM reception
When there is a lot of noise interference with an AM broadcast,
try switching to this mode.
1
Select “TUNER ” and confirm the setting.
2
Select “BEAT PROOF ” and confirm the setting.
3
Select “MODE 1 ” or “MODE 2 ” and confirm
the setting.
4
Press [-MENU, –SETUP, RETURN] 2 times to
select “EXIT ” and press [ENTER].
The r
adio
E
N
GL
IS
H