Philips FW798W - Manual (Page 27)

27
English
RECORDING
Notes:
– For recording, use only tape of IEC type I
(normal tape) or IEC type II (Cr02).
– The tape is secured at both ends with
leader tape. At the beginning and end of
tape, nothing will be recorded for six to
seven seconds.
– The recording level is set automatically,
regardless of the position of Volume,
DBB , Incredible Surround or DSC.
– To prevent accidental recording, break
out the tab on the left shoulder of the
tape side you want to protect.
– If “CHECK TAPE” is displayed, the
protection tab has been broken. Put a
piece of clear adhesive tape over the
opening. Do not cover the Cr02 tape
detection hole when covering the tab
opening.
TIMER STEREO
FM
BACK HSD REPEAT
LW MW AM T.A. NEWS
SOUND NAVIGATION
INCREDIBLE
SURROUND
DIGITAL
SOUND CONTROL
DYNAMIC BASS
BOOST
TAPE CD
PROG
NEWS!
RDS
DOLBY B
NR
DUB
(HSD)
REC
SIDE A•B A. REV
TUNER AUX
PRESET ▲ ▲
STOP • CLEAR SEARCH • TUNING PLAY PAUSE PREV NEXT
MINI HIFI SYSTEM
C D 1 • 2 • 3 CDR FM • AM TAPE 1 • 2
FRONT
60Hz 500Hz 250Hz 1KHz 2KHz 4KHz 8KHz
VOLUME
REC SHUFFLE PROGRAM
S S
L R
C
PRO LOGIC
CLOCK/
TIMER
STANDBY
ON
SWITCH OFF DOLBY PRO LOGIC WHEN RECORDING
Recording from other sources
(only on tape deck 2)
1 Press TAPE ( TAPE 1•2 ) to select tape
deck 2.
2 Load a blank tape into tape deck 2 with
the open side downward.
3 Press SIDE on remote control to select
the recording side.
™ The
BACK or FRONT flag will be
displayed, depending on the side
selected.
4 Press A. REV to select the playback
mode ( е е е е е or ∂ ∂ ∂ ∂ ∂ ).
5 Press CD, TUNER or AUX.
• Start playback of the selected source.
6 Press REC to start recording.
™ The REC flag starts flashing.
7 Press Ç to stop recording.
Notes:
– Only
е е е е е or ∂ ∂ ∂ ∂ ∂ mode is available
during recording .
– During recording, it is not possible to
listen to another source.