Philips FW798W - Manual (Page 18)

18
English
Important:
Before you operate the system,
complete the preparation procedures.
Demonstration mode
The system has a demonstration mode that
shows the various features offered by the
system.
When the system is switched
on for the first time, the demonstration
mode will start automatically.
Notes:
– During the demonstration, if you press
any source (or standby-on) button, the
system will switch to the respective
mode (or standby).
– When the system is switched to standby
mode, the demonstration will resume
five seconds later.
To stop the demonstration mode
• Press and hold STOP•CLEAR Ç
(on
the system only) for five seconds when
the system is in demonstration mode.
™ The demonstration will stop.
™ "DEMO OFF" is displayed.
™ The system will switch to standby
mode.
Note:
– Even though the AC power cord is
removed from and reconnected to the
wall socket, the demonstration will
remain off until it is switched on again.
To start the demonstration mode
• Press and hold STOP•CLEAR Ç
(on
the system only) for five seconds when
the system is in standby mode.
™ The demonstration will begin.
CONTROLS OPERATING THE SYSTEM
FM
STEREO BACK HSD REPEAT REC LW MW AM T.A. NEWS
SOUND NAVIGATION
INCREDIBLE
SURROUND
DIGITAL
SOUND CONTROL
DYNAMIC BASS
BOOST
TAPE CD
PROG
NEWS!
RDS
DOLBY B
NR
DUB
(HSD)
REC
SIDE A•B A. REV
TUNER AUX
PRESET ▲ ▲
STOP • CLEAR SEARCH • TUNING PLAY PAUSE PREV NEXT
MINI HIFI SYSTEM
C D 1 • 2 • 3 CDR FM • AM TAPE 1 • 2
TIMER FRONT
60Hz 500Hz 250Hz 1KHz 2KHz 4KHz 8KHz
VOLUME
SHUFFLE PROGRAM
S S
L R
C
PRO LOGIC
CLOCK/
TIMER
STANDBY
ON
¤ SLEEP TIMER
–
to switch the system to standby mode
at a selected time.
‹ SHUFFLE
–
to play all the available discs and their
tracks in random order.
› B
–
to switch the system to standby mode.
Notes for remote control:
– First select the source you wish to
control by pressing one of the
source select keys on the remote
control (e.g. CD, TUNER, TAPE 1/2
or AUX).
– Then select the desired function
(PLAY, NEXT, etc.).