Paradyne 1740 SHDSL - Manual (Page 41)

1740 SHDSL 2/4-Wire Router User’s Guide
Poison Reverse: Enabled: to enable the Poison Reverse
Disabled: to enable the Splitting Horizon
The default setting of poison reverse parameter is Enabled.
It means the router adopts the split horizon with poison reverse
scheme to avoid routing loop problems. If the parameter is disabled,
the router will use the simple split horizon scheme to solve the
problem.
Authentication Code: Enter the password for authentication.
Mode: Enabled
Auto Summary: Enabled, Disabled
The RIP function is now enabled. The default RIP parameter for each interface is RIPv2. In this default
mode, this router can operate normally without other adjustments. If you want to configure advanced RIP
functions, perform the procedures that follow.
Enter BASIC/ROUTING/RIP/INTERFACE/LAN to configure the parameters.
1740-A2-GB20-00 July 2004 41