Paradyne 1740 SHDSL User Manual

Page 20

Text mode
Original mode

1740 SHDSL 2/4-Wire Router User’s Guide

After creating an RFC 1483 Routed VC, click LAN Setup to set up the router’s Ethernet IP address.

After changing the IP address, click Apply to display the following screen. The Change & Reboot

button allows you to use the new IP address and reboot the router immediately. The Change button
allows using the IP address immediately but you need to save the setting by clicking Save & Reboot
on the Basic menu bar. To use the Web Browser, make sure you change the PC’s IP address.

For example, to change the VC 0/34 from Mode RFC 1483 Bridged to Mode RFC 1483 Routed, follow the
steps below.

STEP1: Click WAN Setup on the Basic menu bar.

20 July 2004 1740-A2-GB20-00