Pentax Optio A20 - Manual (Page 73)

71
Ta
kin
g
Pictur
es
4
7
Press the shutter release button fully.
The picture is taken.
To switch to the screen for registering a frame, press the Green button in Step 3.
You can register frames which you have downloaded from the internet, etc. When
you register a new frame, it replaces one of the existing frames in the built-in
memory. Before you register a new frame, copy it to the SD Memory Card.
1
In the frame selection screen, select the frame you want
to remove and press the Green button.
A message appears and the frames on the SD Memory Card that you
can register in the built-in memory appear.
2
Use the four-way controller (45) to select the frame
you want to register and press the OK button.
The frame is registered in the built-in memory instead of the frame
selected in Step 1.
• The Recorded Pixels is fixed to 3M, and cannot be changed to any
other size.
• Continuous Shooting is not possible in Frame Composite mode.
To Register a New Frame
When a new frame on the SD Memory Card is registered in the built-
in memory, it replaces one of the existing frames in the built-in
memory. The replaced frame is deleted from the built-in memory.