Pentax Optio A20 - Manual (Page 69)

67
Ta
kin
g
Pictur
es
4
Blur reduction mode allows you to set the sensitivity higher than other modes to
reduce camera shake and blurring. Shutter speed and aperture are set
automatically according to the sensitivity value you set. Use the mode under the
shooting conditions that the camera shake or blurring tend to occur.
1
Press the four-way controller (3) in Capture mode.
The Mode Palette appears.
2
Use the four-way controller
(2345) to select
(Blur
reduction mode).
3
Press the OK button.
4
Press the shutter release button
halfway.
The focus frame on the LCD monitor will light green when the camera
is in focus.
5
Press the shutter release button fully.
The picture is taken.
Reducing Camera Shake and Blurring in Pictures
(Blur reduction Mode)
• The recorded pixels are fixed to 5M and cannot be changed.
• When Sensitivity is set to AUTO, the sensitivity will automatically
be set to maximum ISO 1600. The ISO Correction range can be
set to maximum ISO 64-1600.(1p.92)
Shutter release button
Four-way controller
OK button
Blur reduction
OK OK MENU Cancel