Pentax Optio A20 - Manual (Page 32)

30
2
Qu
ick Start
Quick Start
Taking Still Pictures
The simplest procedure for taking still pictures is described below. The
flash fires automatically depending on the light conditions.
1
Press the power switch.
The camera turns on.
2
Confirm the subject and shooting
information on the LCD monitor.
The focus frame in the center of the LCD
monitor indicates the zone of automatic focusing.
You can change the size of the subject by
pressing the zoom button.
Zoom button( x ) : Enlarges the subject.
Zoom button ( w ) : Diminishes the subject.
3
Press the shutter release button halfway.
The focus frame on the LCD monitor will light green when the camera
is in focus.
4
Press the shutter release button fully.
The image appears on the LCD monitor for 0.5 seconds (Instant
Review) and is recorded on the SD Memory Card or in the built-in
memory.
Power switch
Zoom button
Shutter release button
Green button
OK button
36 36
12:00 12:00
36
12:00
08/25/2006 08/25/2006 08/25/2006
Focus frame