Panasonic AJ-HDC27V - Manual (Page 22)

22
Power supply
Using the Panasonic AU-BP402
battery pack
O Do not pull the rubber cap forcefully.
O When mounting the battery case, take care not to
pinch the connecting cord.
1
Detach the battery mount.
3
Attach the AU-M402H battery case.
Open the battery case cover, and raise it above the
rubber cap: screw holes will now be visible.
Tighten the screws using a screwdriver, then
attach the case to the unit and tighten the screws
fully.
2
Connect the AU-M402H battery case connector
with the connector on the unit.
4
Connect the plug on the battery pack to the
connector inside the case, and insert the battery
pack.
Before connecting or disconnecting the plug, be
absolutely sure to turn off the unit’s power.