Option, L 24), Settings using the on-screen display – Panasonic NV-VP32 User Manual
Page 24
Settings Using the On-Screen Display
24
Press [
34] to select the item and press [2 1] to change the
setting.
¬ To exit the settings screen
Press [MENU] twice.
OPTION
AUDIO
CANCEL/
RESET
MENU
ENTER
VHS
STATUS
VHS
CANCEL/RESET
SLOW/
SEARCH
REW
FF
VHS/DVD
INDEX/SKIP
PLAY
TRACKING/V-LOCK
JET REW
CH
AV
VOLUME
DVD
PLAY LIST
DIRECT NAVIGATOR
TOP MENU
RETURN
DISPLAY
PLAY MODE
REC MODE
QUICK REPLAY
AUDIO
REC
ENTER
PLAY SPEED
P.MEMORY
SLOW
-/- -
MENU
AV ENHANCER
PROG/CHECK
SET UP
I-TIMER
TIMER
DVD-RAM
DUBBING
PROG PLAY INPUT SELECT VHS STATUS
DVD STATUS
PICTURE MODE
GROUP
NAVI
OPTION 1/2
TAPE SELECT
[AUTO]
NTSC INPUT SELECT
[AUTO]
NTSC PB SELECT
[onPALTV]
JET NAVIGATOR
[OFF]
DELETE NAVIDATA
[NO]
OSD
[AUTO]
OUT[VHS/DVD] [AUTO]
DUBBING NORMAL AUDIO [L]
END :MENU
SELECT:
OPTION 2/2
MONAURAL [OFF]
END :MENU
SELECT:
e.g. NV-VP32GN
Items
Settings (Underlined items are the initial setting.)
TAPE SELECT
Set the length of tape you are using so the unit can show the correct
remaining time (
l 25).
AUTO:
E30, E60, E90, E120, E180 and E240 tapes
E195:
E195 tapes
E260:
E260 tapes
E300:
E300 tapes
NTSC INPUT SELECT
Select the colour TV system used to record NTSC signals.
AUTO:
NTSC [4.43] and [3.58] signals
≥If the tape has not recorded correctly, select 4.43 or 3.58.
4.43:
NTSC 4.43 signals
3.58:
NTSC 3.58 signals
≥Some programmes on NTSC 3.58 system cannot be recorded
correctly at this position.
NTSC PB SELECT
Select the colour TV system of the TV used to play back a tape
recording NTSC signals.
on PAL TV: TVs that can receive PAL signals
4.43:
TVs that can receive NTSC 4.43 signals
3.58:
TVs that can receive NTSC 3.58 signals
JET NAVIGATOR (
l 20)
ON:
Jet Navigator data automatically registered.
OFF:
Data not registered.
DELETE NAVIDATA (
NO
ENTER:
If you choose this position, press [ENTER] to delete
all the Jet Navigator data.
OSD (
l 25)
AUTO:
Messages appear on the TV for about 5 seconds
when you press [VHS STATUS].
OFF:
Messages do not appear.
OUT [VHS/DVD] (
l 12)
You can set the unit so that the output is automatically switched to
the device which starts playback.
VHS:
Only VHS outputs
MANUAL: VHS output and DVD output are manually switched.
AUTO:
VHS and DVD are automatically switched depending
on the manipulation or the unit operation.
DUBBING NORMAL AUDIO (
Select the audio channel to be recorded on the Normal audio track
when dubbing a bilingual DVD.
L:
To record the sound from left channel
R:
To record the sound from right channel
MONAURAL
Select the sound mode. (For NV-VP32GN only)
ON:
To record the normal sound during a NICAM
broadcast or if the stereo sound is distorted due to
inferior reception conditions.
OFF:
Normally set at this position.
VP32GL.book 24 ページ ２００４年６月１１日 金曜日 午後４時３２分