Philips 19PFL3403/77 - Manual (Page 23)

23
If necessary, adjust the picture position to the
center of the screen with the cursor buttons.
Adjust display settings for PC
mode
Adjust your TV display settings in PC mode.
1
Press MENU/BACK and select [Features]
> [Geometry].
2
Press OK.
3
Press or to select an item.
4
Press or to adjust the setting.
5
Press MENU/BACK to return to the
previous menu, or press STATUS/EXIT to
exit.
You can configure the following display settings
for PC mode:
[Auto Adjust]: Synchronizes the phase and
clock on the TV and PC.
[Horizontal Shift] and [Vertical Shift]:
Adjusts the horizontal and vertical position
of the picture.
[Clock] and [Phase]: Fine-tunes the TV to
match the display settings of the PC.
•
•
•
Geometry
Auto Adjust
Horizontal Shift
Vertical Shift
Clock
Phase
+50
+50
100
100
Picture Sound Features Install
: SEL MENU : ADJ : EXIT
Geometry
Auto Adjust
Horizontal Shift
Vertical Shift
Clock
Phase
+50
+50
100
100
Picture Sound Features Install
: SEL MENU : ADJ : EXIT
7 Use your TV as
a PC monitor
For information about how to connect a PC to
the TV, see the Quick Start.
Caution
Before you connect your PC, set the PC monitor
refresh rate to 60Hz.
•
Configure your TV in PC
mode
1
Press SOURCE and select PC, then press
OK.
Tip
Toggle TV/PC to switch to PC and the last accessed
mode.
•
Note
Certain picture and sound features are not available in
PC mode.
•
Supported screen resolutions
The following screen resolutions are supported
in PC mode:
Resolution Refresh rate
640 x 480 60Hz
800 x 600 60Hz
1024 x 768 60Hz
1280 x 768 60Hz
1280 x 1024 60Hz
En
gl
is
h
EN