Philips 19PFL3403/77 - Manual (Page 16)

16
Automatically switch the TV to
standby (Sleeptimer)
Sleeptimer switches the TV to standby after a
delay. You can always switch off your TV earlier
or reset the sleeptimer during the countdown.
1
Toggle SLEEP on the remote control to
cycle through the sleep timer settings:
off, 15, 30, 45, 60, 90, 120, 180 and 240
minutes.
Tip
Press SLEEP once to view the remaining time before
the TV switches to standby. Press SLEEP repeatedly to
change the setting or to turn off sleep timer.
•
Set the clock
1
Press MENU/BACK and select [Features]
> [Timer].
2
Press OK.
3
Press to highlight [Current Time]
and press or to select the hours or
minutes.
4
Press or to adjust the hours or
minutes.
5
Press MENU/BACK to return to the
previous menu, or press STATUS/EXIT to
exit.
Timer
Sleep
Current Time
Activate
Start Time
Stop Time
Source
Channel No.
Picture Sound Features Install
Off
09:30
Off
--:--
--:--
TV
2
: SEL MENU : ADJ : EXIT
Timer
Sleep
Current Time
Activate
Start Time
Stop Time
Source
Channel No.
Picture Sound Features Install
Off
09:30
Off
--:--
--:--
TV
2
: SEL MENU : ADJ : EXIT
3
Press MENU/BACK to return to the
previous menu, or press STATUS/EXIT to
exit.
Use Contrast +
Optimizes the contrast settings for overall
picture quality.
1
Press MENU/BACK and select [Features]
> [Contrast +].
2
Press or to turn on [Contrast +].
3
Press MENU/BACK to return to the
previous menu, or press STATUS/EXIT to
exit.
Use timers
This section describes how to set the clock and
switch the TV on or off at a specified time.
Ch. Setup
Format
Timer
Closed Caption
Parental Control
Back Light
Contrast +
Geometry
Mode Selection
5
Picture Sound Features Install
Widescreen
>
>
>
On
>
PC
: SEL MENU : ADJ : EXIT
Ch. Setup
Format
Timer
Closed Caption
Parental Control
Back Light
Contrast +
Geometry
Mode Selection
5
Picture Sound Features Install
Widescreen
>
>
>
On
>
PC
: SEL MENU : ADJ : EXIT
EN