Philips 19PFL3403/77 - Manual (Page 11)

11
To disconnect the TV from the power
Disconnect the TV from the power in one of
the following ways:
Unplug the power cord from the power
connector at the back of the TV.
Unplug the power cord from the power
socket outlet.
Pull the power cord by the plug; do not pull on
the power cord.
Insert the remote control
batteries
1
Slide the battery cover off the back of the
remote control.
2
Insert the 2 supplied batteries (AAA). Be
sure the + and - ends of the batteries line
up with the markings inside the case.
3
Slide the cover back into position.
•
•
To connect the power cord
Warning
Verify that your mains voltage corresponds with the
voltage printed at the back of the TV. Do not insert the
mains cord if the voltage is different.
•
1
Locate the power connector at the back of
the TV.
The location of the power connector
varies according to TV model.
2
Insert the power cord fully into the power
connector.
3
Connect the power cord plug to the
power outlet. Ensure that the cord is tightly
secured at both ends.
Cable Cable
En
gl
is
h
EN