Printek FormsMaster 8000 - Manual (Page 99)

Printek Emulation
93
Control Codes and Escape Sequences
Grouped by Function
Communications
End of Text ETX
If “ETX/ACK” is set to “On” in the interface setup menu, then receipt of an ETX causes the printer to
transmit an ACK to the host computer.
Since the ETX may be a legal value within an escape sequence, it is the user's responsibility to ensure
that an ETX used for data handshake is not sent within an escape sequence. The user must also ensure
that the maximum block size or the number of blocks sent at one time does not exceed the input buffer
size of the printer.
ETX/ACK handshake is available only with serial I/O.
Control code: ETX
Hexadecimal: 03
Deselect Printer DC3
(or) XOFF
Deselects the printer. Use of this command is discouraged, because the printer will remain offline until
an operator presses the ONLINE button on the control panel.
Control code: DC3
Hexadecimal: 13