Printek FormsMaster 8000 - Manual (Page 102)

Printek Emulation
96
Character Sets
Select Font ESC F n
Select font n according to the following table.
n Font
0 Epson FX Draft
1 Epson FX Letter Quality
2 Proprinter PC Draft
3 Proprinter PC Letter Quality
10 EBCDIC Draft
11 EBCDIC Letter Quality
12 OCR-A Optical Quality
13 OCR-B Optical Quality
32 Epson FX Fast Draft
33 Epson FX Draft
34 Epson FX Letter Quality
36 Proprinter PC Fast Draft
37 Proprinter PC Draft
38 Proprinter PC Letter Quality
44 PC Latin II (Slavic) Fast Draft
45 PC Latin II (Slavic) Draft
46 PC Latin II (Slavic) Letter Qualit
64 EBCDIC Fast Draft
65 EBCDIC Draft
66 EBCDIC Letter Quality
71 OCR-A Optical Quality
75 OCR-B Optical Quality
Overrides the “Font” value in the forms menu. If the specified font is not installed, the “Font” value in
the forms menu will be used to select the default font.
Example: The following escape sequence will select the OCR-B Optical Quality font.
Escape Sequence: ESC F 75
Hexadecimal: 1B 46 4B
Print Single Character ESC \ n
Prints the character n from the selected font. This sequence may be used to print a character that is
normally treated as a control code.
Example: The following escape sequence will print a left arrow, if a Proprinter font is selected. This
character is normally not printable, since it is treated as the ESC control code.
Escape Sequence: ESC \ ESC
Hexadecimal: 1B 5C 1B